… Different gauges and measuring devices provide a 3D image of the surface component. scanCONTROL laser line scanners are ideally suitable for this purpose. Based on the triangulation principle, they measure…
… in the cutting process, the knife sharpness test is carried out during operation. A Micro-Epsilon laser profile scanner of the scanCONTROL 2910-10/BL series measures the front side of the knife. The sensor…
… for almost all elements of the periodic table in one measurement run. Micro-Epsilon scanCONTROL 2600 laser profile scanners were also integrated so that the systems work as quickly and accurately as possible.…
… table for fully automatic testing of the dimensional accuracy of sheet metal. It operates with laser profile sensors by Micro-Epsilon. The sensors measure sheet metal blanks and check them for width,…
…Gap measurement in forming lines Before welding pipes, the gap is monitored with laser scanners. The scanners provide precise readings, allowing the position of the center point to be output. In this way, the pipe is…
… of metal bars. With the X-Frame measuring system the diameter is measured continuously. Two laser micrometers measure the diameter with high resolution and measuring rate. The X-Frame enables the…
… the pressing process The measurement of the distortion is carried out using several optoNCDT 1420 laser triangulation sensors, which are placed around the metal sheet, either in the tool or on the side of…
… of width, cambering and diameter of metal strips in shearing lines. These are equipped with three laser micrometers and detect the cambering when the strip stops. The width measurement is taken during…
…Measuring and inspecting laser welding seams Fully automatic welding units can be found in numerous industrial areas. Quality control in the form of a 100% inspection is indispensable in order to achieve defect-free…
…Double sheet detection before pressing Before shaped sheets are fed into the press, laser-optical displacement sensors are used, which enable double sheet detection. Two sensors are mounted above and below the…
